Позвоните нам

 

Запрос

 

Newsletter

[Translate to RU:] Hammermills from Erdwich

Hammermills

The champions for hard and brittle materials

Hammer mills are particularly suitable for metal scrap, electrical and electronic scrap or chips made of steel, aluminum, but also other materials. And due to the easy adjustability during operation, also the balling of non-ferrous metals is no problem. The result size is variable and can be changed during operation. This product feature in particular is the best example of its high practical suitability.

What distinguishes the HA600 and HA800 hammer mills

► Simple maintenance

       | Two hydraulically powered housing access points.
       | Easy to replace grinding elements on the impact rotor.

► Savings on operating costs

       | Reversible grinding elements with long service lives.
       | Extremely wear-resistant mill rotor.
 

► Configurable throughput and particle size

       | Milling gap individually configurable,
         simple replacement of grinding elements.
       | Configurable rotor speeds.

► Moist material processing possible

       | With externally placed shaft bearings and specialised housing
         seals no milled product or dust can enter the bearings.

► Low-noise, low-dust operation

       | With optionally available soundproofing housing.
       | Specialised shaft and housing seals,
         plus corresponding extraction points.

► Efficient, safe operation

       | PLC unit, offering an overload cut-out to protect the
         machine from overloading or solid parts.

Experience our shredders first hand

Testing material under real conditions, fine-tuning, showing alternatives
- that is the world at the Erdwich Test Center.
For you as our customer, this means a secure basis
for your investment decision.




REQUEST AN APPOINTMENT NOW

Wide range of applications and maximum variability

The flexible design of the shock and impact principle, adapted to the different materials being processed, can be constructed both for the breaking-up of materials and as baling machines, thereby offering a wide-ranging scope of applications:

  • Refrigerator recycling as well as electrical and electronic scrap processing as a pre- or post-stage after standard shredding technology
  • Processing of aluminium profiles and composite materials
  • Preparation of shredder light fraction for subsequent separation
  • Recycling of printed circuit boards, IC components and small electronic equipment
  • Grinding of non-ferrous composite materials with subsequent baling
  • Processing of large-volume metal swarf
  • Preparation of tyre wires for subsequent separation of rubber and iron
  • Slag processing
  • and much more
[Translate to RU:] [Translate to GB:] Hammermühle HA800 in der Produktion

Top technology for the selective processing of hard and brittle materials

► Integrated explosion protection

       | Highest safety standards.
 

► Opening for maintenance of miling board

       | Direct access for easy maintenance.
 
 

► Miling board adjustment

       | Overload protection through stable spring assemblies.
       | Emergency ejection in case of massive material and interfering substances.

► Hydraulic housing opening

       | for easy accessibility during maintenance and inspection work.

► Housing dust- and gas-tight

       | Special shaft and housing seal.
       | Allows inerting with nitrogen or other gases.

► Controlled particle size flow rate

       | Individual setting of the grinding gap opening
         and easy changing of the grinding tools.
       | Adjustable rotor speed

► External shaft bearings

       | To protect the bearings from contamination.
 

► Hydraulically extendable screen

       | for easy accessibility.

[Translate to RU:] [Translate to GB:] Hammermühle HA600

HA600 - Technical Data

► Quantity of rotors                1
► Drive power 11 kW up to 45 kW
► Rotor diameter 150 mm
► Weight 1.500 kg up to 1.650 kg
► Sieve grate opening 4 mm up tp 65 mm

HA800 - Technical Data

► Quantity of rotors                1
► Drive power 45 kW up to 132 kW
► Rotor diameter 610 mm
► Weight 9.000 kg up to 13.000 kg
► Sieve grate opening 8 mm up to 100 mm
[Translate to RU:] [Translate to GB:] Hammermühle HA800

Experience our shredders first hand

Testing material under real conditions, fine-tuning, showing alternatives
- that is the world at the Erdwich Test Center.
For you as our customer, this means a secure basis
for your investment decision.




REQUEST AN APPOINTMENT NOW

References